TC
225 - 260 - 300 - 350
| Technical Specifications | 225 | 260 | 300 | 350 | |
|---|---|---|---|---|---|
| Height of centres | mm | 225 | 260 | 300 | 350 |
| Swing over bed | mm | 450 | 520 | 600 | 700 |
| Swing over cross slide | mm | 230 | 300 | 380 | 480 |
| Swing in gap | mm | 620 | 690 | 770 | 870 |
| Distance between centers | mm | 1-1.5-2 | 1-1.5-2-3-4-5 | ||
| Bed width | mm | 400 | |||
| Spindle bore | mm | 82 / 105 | |||
| Spindle nose | Camlock | 8" / 11" | |||
| Number of spindle speeds | N. | 24 / 12 | |||
| Spindle speed range | rpm | 9:1600 | 9:1600 / 16:1200 | ||
| Main motor power (S6/S1) | Kw | 7.5 (Opt. 9.2) | 7.5 (Opt. 9.2 - 11) | ||
| Range of longitudinal feeds | mm/rev | (93) 0.028 - 6.43 / (65) 0.063 - 2.52 | |||
| Range of transversal feeds | mm/rev | (93) 0.012 - 2.73 / (65) 0.027 - 1.07 | |||
| Range of threads Metric | mm | (54) 0.5 - 224 / (22) 1 - 14 | |||
| Range of threads Whitworth | T.P.I. | (54) 1/8 - 72 / (25) 2 - 28 | |||
| Range of threads Module | mm | (54) 0.5 - 112 / (18) 0.5 - 7 | |||
| Range of threads Diametral Pitch | DP | (54) 1/4 - 64 / (24) 4 - 56 | |||
| Cross slide travel | mm | 300 | 340 | ||
| Top slide travel | mm | 130 | 150 | ||
| Tailstock quill diameter | mm | 75 | 85 | ||
| Tailstock quill travel | mm | 150 | 200 | ||
| Tailstock quill taper | Morse | 5 | |||
| Double mechanical clutch - Electromagnetic brake | |||||
| Weigth | 225 | 260 | 300 | 350 | |
|---|---|---|---|---|---|
| TC x 1000 | Kg | 2600 | 2800 | 2900 | 3000 |
| TC x 1500 | Kg | 2900 | 3200 | 3300 | 3400 |
| TC x 2000 | Kg | 3300 | 3600 | 3700 | 3800 |
| TC x 3000 | Kg | --- | 4400 | 4500 | 4600 |
| TC x 4000 | Kg | --- | --- | 5300 | 5400 |
| TC x 5000 | Kg | --- | --- | 6100 | 6200 |
| Optional | ||
|---|---|---|
| Lathe with height of centres | mm | 400 |
Standard equipment
- Bed – Legs – Headstock – Tailstock – Carriages made of cast iron
- Bed guideways are induction hardened and ground
- Headstock with induction hardened and ground gears; spindle is assembled on high accuracy bearings
- Double mechanical clutch
- Electromagnetic brake
- Rapid feeds
- Air device on the tailstock to ease the displacement along bed
- Electric plant with low voltage control panel; it is placed in a suitable airtight cabinet. Make of components is Siemens and/or Schneider
- Spindle reduction sleeve
- 2 Dead centres
- Safety protections according to EC standards: plexiglas safety chuck guard with microswitch – turret plexiglas safety guard – rear protection along full length of the machine – protection of leadscrew and feed bars – emergency mushroom button
- Chip tank on wheels
- Cooling system with electro-pump
- Central lubrication of guideways with automatic pump
- Steady rest and follow rest
- Service tools and wrenches – Test certificate – Full electric diagram – Operation and maintenance book – Machine built according EC standards
Optional equipment
- Manual tool holder turret: Squared (4-way tool post) – Quick change turret – Indexing turret – Multifix turret
- 3 or 4 jaw self centering chuck
- 4-jaw independent chuck
- Live centre
- 2 or 3 axis digital readout
- Steady rest with larger Ø than standard one
- 6 position longitudinal stop
- Thread chasing dial
- Work area lighting
- Variable spindle speeds (Inverter)
- Cutting Surface Speed
- Powered small tool post
- Powered displacement of tailstock along bed
- Taper turning attachment
- Grinding equipment
- Levelling and anchoring pads
Would you like a quotation or more information for TC
Fill out the form, we will reply as soon as possible
